GPHP600 Datasheet, PDF (1/3 Pages) SL Power Electronics – High Power Supplies 600/700 Watt AC/DC Universal Input Power Supply

GPHP SERIES SINGLE OUTPUT  POWER SUPPLY
High Power Supplies 600/700 Watt AC/DC Universal Input Power Supply
• 90 -264 Vac nominal input range
g
• Overvoltage and short circuit protection
• Approved to UL, CSA and EN Standards
• Power Good LED
• Low Leakage
SUMMARY
The GPHP Series are universal input AC/DC power supplies
with power factor correction (PFC) with up to 700 Watts ouput
power. The GPHP product in corporates ‘hot-swap’ capabilities
and a handle. The series is approved to EN60950 to reduce
design-in time and end system compliance costs
GPHP 600 shown in CRA rack
All specifications are typical at nominal input, full load at 25 ^OC unless otherwise stated
SPECIFICATIONS
OUPUT SPECIFICATIONS
Output Power
Integral forced air
Total Regulation
Rise time
At turn-on
Transient response
Main output 25%
0.1 A/ms
Temperature Coef-
ficient
Overvoltage protection
Short Circuit protection block wall
700 Watts max.
See table
2.0 s max.
3.5% max. dev. 350 ms recovery
to 1%
+/-0.03%/oC
125% +/-10%
Yes
EMC INFORMATION
Conducted emissions FCC Pt 15, EN55022
Radiated emissions FCC Pt 15, EN55022
Line freq. harmonics EN61000-3-2
Voltage fluctuations EN61000-3-3
ESD Air
EN61000-4-2
ESD Contact
EN61000-4-2
Level B
Level A
Class A
Complies (clause 5b)
8 kV contact
6 kV air
Radiated immunity
Fast Transients (EFT)
Line surge immunity
Conducted immunity
Power freq. mag. field
Voltage dip immunity
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
EN61000-4-11
3 V/m
2 kV 5 kHz
1 kV diff /2 kV cm
3 Vrms
3 A/m
Unit will ride through without
loss of output at 75% of
rated load with AC power fail
warning.
INPUT SPECIFICATIONS
Input Voltage range
Universal input
Input frequency
Input surge current
Ground Leakage current
Input current
Input fuse
264 Vac 60 Hz
120 Vac
230 Vac
F1,F2
100-240 nom (85 - 264 max)
Vac
47 Hz to 63 Hz
25 A max.
160 mA
8.5 A
4.5 A
10.0 A
ENVIRONMENTAL SPECIFICATIONS
Thermal Performance
operating ambient
(see ratings chart)
non-operating
0 - 50 ^oC
Convection cooled
Maximum Altitude
operating / non-operating
Relative Humidity
Vibration (operating)
non-condensing
0.003 g²/Hz
Vibration (non-operating) 0.026 g²/Hz
Shock
Shock
half-sine 20 g_pk
half-sine 40 g_pk
-20 ^oC -50 ^oC
-40 to +85 ^oC
600 Watts
10,000 ft. / 40,000
ft. max.
5% - 95% RH
1.5 g_rms 3 axes 10
min/axis
5.0 g_rms 3 axes, 1
hr/axis
10 ms, 3 axes, 6
shocks total
10 ms, 3 axes, 6
shocks total
Page 1 of 3