SKY67013_396LF Datasheet, PDF (9/15 Pages) Skyworks Solutions Inc. – 300 to 1500 MHz Low-Noise, Low-Current

DATA SHEET • SKY67013-396LF: LOW-NOISE, LOW-CURRENT AMPLIFIER
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
–40 °C
0.5
+25 °C
+85 °C
0
0 2 4 6 8 10 12 14 16 18 20 22 24
Frequency (GHz)
Figure 26. Stability Factor (μ2) vs Frequency and Temperature, Wide Band
Evaluation Board Description
The SKY67013-396LF Evaluation Board is used to test the
performance of the SKY67013-396LF LNA. An assembly drawing
for the Evaluation Board is shown in Figure 27. An Evaluation
Board schematic diagram is provided in Figure 28. Table 5
provides the Bill of Materials (BOM) list for Evaluation Board
components.
Package Dimensions
The PCB layout footprint for the SKY67013-396LF is provided in
Figure 29. Typical part markings are shown in Figure 30. Package
dimensions for the 8-pin DFN are shown in Figure 31, and tape
and reel dimensions are provided in Figure 32.
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The SKY67013-396LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
201657F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 22, 2015
9