SKY13345-368LF Datasheet, PDF (7/12 Pages) Skyworks Solutions Inc. – SKY13345-368LF 0.1-3.5 GHz SP3T Switch

DATA SHEET • SKY13345-368LF SP3T SWITCH
Evaluation Board Description
The SKY13345-368LF Evaluation Board is used to test the
performance of the SKY13345-368LF SP3T Switch. The board is
made from a two-layer construction with ½ oz. copper cladding
on top and bottom. The first layer material is 12-mil Rogers
4003C. The second layer material is 49-mil of FR4 for a total
board thickness of about 62 mils. The impedance of all RF traces
is 50 Ω.
An Evaluation Board schematic diagram is provided in Figure 8.
An assembly drawing for the Evaluation Board is shown in
Figure 9.
Package Dimensions
The PCB layout footprint for the SKY13345-368LF is provided in
Figure 10. Typical case markings are shown in Figure 11.
Package dimensions for the 12-pin QFN are shown in Figure 12,
and tape and reel dimensions are provided in Figure 13.
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
THE SKY13345-368LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 °C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Figure 8. SKY13345-368LF Evaluation Board Schematic
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
201194D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 18, 2011
7