SKY13345-368LF Datasheet, PDF (5/12 Pages) Skyworks Solutions Inc. – SKY13345-368LF 0.1-3.5 GHz SP3T Switch

DATA SHEET • SKY13345-368LF SP3T SWITCH
Table 3. SKY13345-368LF Electrical Specifications (2 of 2) (Note 1)
(VDD = 2.5 V to 5.5 V, VCTL = 0 V (Low), VCTL = 1.8 V (High), TOP = +25 °C, PIN = 0 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless
Otherwise Noted)
Parameter
Symbol
Test Condition
Min
Typical
Max
Units
DC Specifications
Control voltage:
High
Low
VCTL_HIGH
VCTL_LOW
1.6
1.8
3.3
V
0
0.4
V
Supply voltage
VDD
2.5
5.5
V
Supply current
IDD
VDD = 3.5 V
30
μA
Control current
Ictl
V1 = V2 = V3 = 1.8 V
2
μA
Shutdown mode supply current
Ioff
VDD = 3.5 V,
V1 = V2 = V3 = 0 V
5
μA
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Note 2: Dwell time refers to the amount of time the switch is required to stay in any one state before switching to another state. Refer to the Functional Description section for more
information.
Note 3: Startup time refers to the amount of time it takes for the switch to be fully operational when coming out of shutdown mode (V1 = V2 = V3 = logic 0).
Table 4. SKY13345-368LF Truth Table
V1
(Pin 4)
V2
(Pin 5)
0
0
1
0
0
1
0
0
0
1
Note: 1 = 1.6 to 3.3 V
0 = 0 to 0.4 V
Any state other than described in this Table places the switch into an undefined state.
V3
(Pin 6)
0
0
0
1
1
State
Shutdown
RFC to J1
RFC to J2
RFC to J3
RFC to J2 and J3
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
201194D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 18, 2011
5