SKY13453-385LF Datasheet, PDF (6/10 Pages) Skyworks Solutions Inc. – 0.01 to 6.0 GHz Single Control SPDT Switch

DATA SHEET • SKY13453-385LF: SPDT SWITCH
Evaluation Board Description
The SKY13453-385LF Evaluation Board is used to test the
performance of the SKY13453-385LF SP2T Switch. An Evaluation
Board schematic diagram is provided in Figure 8. An assembly
drawing for the Evaluation Board is shown in Figure 9.
Package Dimensions
The PCB layout footprint for the SKY13453-385LF is provided in
Figure 10. Typical part markings are shown in Figure 11. Package
dimensions for the 6-pin QFN are shown in Figure 12, and tape
and reel dimensions are provided in Figure 13.
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The SKY13453-385LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 C. It can be used for lead or lead-free soldering. It
can be used for lead or lead-free soldering. For additional
information, refer to the Skyworks Application Note, Solder Reflow
Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
6
Supply Voltage
C4
1
VDD
C3
VCTL ⁵
RFC Port
Control Voltage
RF1 Port
2
RF1
C1
3
4
RF2
C2
RF2 Port
Notes:
C1, C2, and C3 = 22 pF for WLAN applications (2.4 to 6 GHz)
47 pF for cellular applications (0.7 to 3 GHz)
10 nF for low frequency applications (less than 100 MHz)
C4 = 10nF
Y0353
Figure 8. SKY13453-385LF Evaluation Board Schematic
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
6
June 30, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202830C