SKY13453-385LF Datasheet, PDF (2/10 Pages) Skyworks Solutions Inc. – 0.01 to 6.0 GHz Single Control SPDT Switch

DATA SHEET • SKY13453-385LF: SPDT SWITCH
Table 1. SKY13453-385LF Signal Descriptions
Pin
Name
Description
1
VDD
Supply voltage
2
RF1
RF port 1. Must be DC blocked.
3
GND
Ground
Pin
Name
4
RF2
5
VCTL
6
RFC
Description
RF port 2. Must be DC blocked.
DC control voltage
RF common port. Must be DC blocked.
Electrical and Mechanical Specifications
The absolute maximum ratings of the SKY13453-385LF are
provided in Table 2. Electrical specifications are provided in
Table 3.
The state of the SKY13453-385LF is determined by the logic
provided in Table 4. A timing diagram is shown in Figure 3.
The typical performance characteristics for the SKY13453-385LF
are shown in Figures 4 through 7.
Table 2. SKY13453-385LF Absolute Maximum Ratings (Note 1)
Parameter
Symbol
Minimum
Maximum
Units
Supply voltage
VDD
2.5
3.7
V
Control voltage
VCTL
–0.2
+3.0
V
Input power
PIN
+33
dBm
Storage temperature
TSTG
–40
+125
C
Operating temperature
TOP
–40
+90
C
Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
2
June 30, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202830C