SKY13372-467LF Datasheet, PDF (6/9 Pages) Skyworks Solutions Inc. – 0.1 to 6.0 GHz High-Isolation SPDT Absorptive Switch

DATA SHEET • SKY13372-467LF: SPDT ABSORPTIVE SWITCH
Table 4. SKY13372-467LF Truth Table
VCTL
0
1
RFC to J1
Insertion loss
Isolation
RFC to J2
Isolation
Insertion loss
Evaluation Board Description
The SKY13372-467LF Evaluation Board is used to test the
performance of the SKY13372-467LF SPDT absorptive switch. An
assembly drawing for the Evaluation Board is shown in Figure 8.
Package Dimensions
The PCB layout footprint for the SKY13372-467LF is shown in
Figure 9. Typical part markings are noted in Figure 10. Package
dimensions for the 16-pin QFN are shown in Figure 11, and tape
and reel dimensions are provided in Figure 12.
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The SKY13372-467LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
GND
VDD
VCTL
RFC
VP
VCTL
1
??
J1
J2
??
J1
J3
CBLK
J2
Through
??
??
Through
C_BL = 47 pF capacitor (5 places)
S1597
Figure 8. SKY13372-467LF Evaluation Board Assembly Diagram
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
6
August 14, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201443D