SKY13372-467LF Datasheet, PDF (4/9 Pages) Skyworks Solutions Inc. – 0.1 to 6.0 GHz High-Isolation SPDT Absorptive Switch

DATA SHEET • SKY13372-467LF: SPDT ABSORPTIVE SWITCH
Table 3. SKY13372-467LF Electrical Specifications (2 of 2) (Note 1)
(VCTL = 0 V/3 V, VDD = 3 V, TOP = +25 C, PIN = 0 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
Min
Typical
Max
RF Specifications (continued)
Switching rise time
Switching fall time
Switching on time
Switching off time
Switching on time
Switching off time
Insertion loss settling time
TRISE
10% to 90% RF
TFALL
90% to 10% RF
TON
50% VCTL to 90% RF
TOFF
50% VCTL to 10% RF
TON
50% VCTL to 98% RF,
TOP = –40 °C to +85 °C
TOFF
50% VCTL to 2% RF,
TOP = –40 °C to +85 °C
ΔIL
Insertion loss in dB measured @ 1 μs
(referenced to a rising 10% RF level on
J1 and J2) minus the CW insertion loss in
dB.
Freq = 2 GHz, TOP = –40 °C to +85 °C,
VCTL = 5 V, pulse width = 1.15 ms,
50% duty cycle.
40
40
100
100
1
2
100
300
0.25
DC Specifications
Control voltage:
VCTL
Low
High
Control current
ICTL
Supply voltage
VDD
Supply current
IDD
Supply voltage:
VDD = 5.0 and VCTL = 2.7 V
(Note 2)
Note 1: Performance is guaranteed only under the conditions listed in this table.
Note 2: For lowest possible IDD, VCTL should be as close as possible to VDD.
–1
0.7 x VDD; 3.0
for VDD > 4.0 V
2.7
0.3 × VDD
VDD
5
5.0
100
Units
ns
ns
ns
ns
μs
ns
dB
V
V
μA
V
μA
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
4
August 14, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201443D