English
Language : 

SKY65364-21 Datasheet, PDF (4/14 Pages) Skyworks Solutions Inc. – High-efficiency PA
DATA SHEET • SKY65364-21: T/R FRONT-END MODULE
Table 3. SKY65364-21 Absolute Maximum Ratings1
Parameter
Symbol
Minimum
Maximum
Units
LNA supply voltage
VCC_RX
–0.3
+5.0
V
LNA supply current
ICC_RX
20
mA
PA supply voltage
VCC_TX1/2/3
–0.3
+6.0
V
PA supply current
ICC_TX
1.6
A
Digital supply voltage
VDD1
–0.5
+5.5
V
Digital supply voltage
VDD2
–0.5
+5.5
V
Digital control voltage (EN, TR, BYP)
VCTL
–0.5
VDD1 + 0.3
V
Transmit output power control voltage
VPC
–0.3
+5.0
V
Receive RF input power (RX2)
PIN_RX2
+5
dBm
Receive bypass RF input power (RX2)
PIN_RX2_BYP
+18
dBm
Receive RF input power (ANT)
PIN_ANT
+33
dBm
Transmit RF input power
PIN_TX
+15
dBm
Transmit RF input power, bypass mode
PIN_TX_BYP
+20
dBm
Operating case temperature (Note 2)
TC
–40
+85
°C
Storage temperature
TSTG
–55
+150
°C
Junction temperature
TJ
+150
°C
T/R port load VSWR in transmit mode
VSWR
10:1
–
1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set
at or below their nominal value.
2 Nominal thermal resistance, junction to case, is 18 °C/W.
ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This
device must be protected at all times from ESD when handling or transporting. Static charges may easily produce
potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-
standard ESD handling precautions should be used at all times.
Table 4. SKY65364-21 Recommended Operating Conditions
Parameter
Symbol
Transmit frequency range
f
Receive frequency range
f
LNA supply voltage
VCC_RX
Digital supply voltage
VDD1
VDD2
PA supply voltage
VCC_TX1/2/3
Digital input voltage, logic 1 (EN, TR, BYP)
VIH
Digital input voltage, logic 0 (EN, TR, BYP)
VIL
Transmit output power control voltage
VPC
Receive RF input power (RX2)
PIN_RX2
Transmit RF input power (TX)
PIN_TX
Transmit duty cycle
Minimum
890
900
3.00
3.00
3.40
3.40
2.8
0
0
Typical
3.30
VCC_RX
VCC_TX1/2/3
3.60
2.25
+12
Maximum
960
960
3.45
VCC_RX
3.80
3.80
VDD1
0.7
2.50
–15
+13
50
Units
MHz
MHz
V
V
V
V
V
V
V
dBm
dBm
%
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4
May 24, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203189F