SKY13523-639LF Datasheet, PDF (4/9 Pages) Skyworks Solutions Inc. – 0.7 to 3.0 GHz High-Isolation SP3T Switch

DATA SHEET • SKY13523-639LF: HIGH-ISOLATION SP3T SWITCH
Table 4. SKY13523-639LF Control Logic
VDD
(Pin 3)
V1
(Pin 10)
V2
(Pin 9)
Insertion Loss Path
1
1
0
RFC to RF1
1
0
0
RFC to RF2
1
0
1
RFC to RF3
Note: “1” = 1.8 V; “0” = 0 V. Any state other than that described in this Table places the switch into an undefined state. An undefined state will not damage the device.
Evaluation Board Description
The SKY13523-639LF Evaluation Board is used to test the
performance of the SKY13523-639LF SP3T Switch. An Evaluation
Board schematic diagram is provided in Figure 3. An assembly
drawing for the Evaluation Board is shown in Figure 4.
Package Dimensions
The PCB layout footprint for the SKY13523-639LF is provided in
Figure 5. Typical part markings are shown in Figure 6. Package
dimensions for the 14-pin QFN are shown in Figure 7, and tape
and reel dimensions are provided in Figure 8.
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The SKY13523-639LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
4
August 21, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202834B