SKY13523-639LF Datasheet, PDF (3/9 Pages) Skyworks Solutions Inc. – 0.7 to 3.0 GHz High-Isolation SP3T Switch

DATA SHEET • SKY13523-639LF: HIGH-ISOLATION SP3T SWITCH
Table 2. SKY13523-639LF Absolute Maximum Ratings (Note 1)
Parameter
Symbol
Minimum
Maximum
Units
Supply voltage
VDD
3.7
V
Control voltage (V1,V2)
VCTL
–0.5
+3.3
V
RF input power
PIN
+26
dBm
Operating temperature
TOP
–30
+90
C
Storage temperature
TSTG
–55
+150
C
Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 3. SKY13523-639LF General Electrical Specifications (Note 1)
(VDD = 3.3 V, V1 = V2 = High = 1.8 V, PIN = 0 dBm, TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
(Note 2)
Min
Typical
Max
Units
DC Specifications
Supply voltage
Supply current
Control voltage:
High
Low
Control current
VDD
IDD
VCTL_H
VCTL_L
ICTL
VDD = 3.3 V
V1 = V2 = 1.8 V,
VDD = 3.3 V
2.5
3.3
V
35
65
μA
1.35
1.80
3.30
V
0
0.45
V
10
μA
RF Specifications
Insertion loss (RFC pin to RF1/2/3 pins)
IL
704 to 960 MHz
1710 to 2170 MHz
2300 to 2690 MHz
0.65
0.85
dB
0.75
0.95
dB
0.8
1.0
dB
Isolation (RFC pin to RF1/2/3 pins)
Iso
704 to 960 MHz
47
50
dB
1710 to 2170 MHz
45
48
dB
2300 to 2690 MHz
45
48
dB
Voltage standing wave ratio, all ports
VSWR
0.1 dB input compression point (RFC pin to
RF1/2/3 pins)
Third order input intercept point
IP0.1dB
IIP3
Turn-on/turn-off time
0.7 to 3.0 GHz, referenced
to 50 Ω
0.7 to 3.0 GHz
0.7 to 3.0 GHz, all RF
ports, fo = 0.8 to 3.0 GHz,
Δf = 1 MHz,
PIN = +20 dBm/tone
Measured from 50% of
final VDD supply voltage
to final RF power ±1 dB
1.4
–
+32
dBm
+56
dBm
400
550
ns
Switching speed
Measured from 50% of
final VCTRL voltage to
final RF power ±1 dB
Note 1: Performance is guaranteed only under the conditions listed in this table.
500
650
ns
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
202834B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 21, 2015
3