SKY13492-21 Datasheet, PDF (20/23 Pages) Skyworks Solutions Inc. – 0.7 to 2.7 GHz SP16T MIPI Antenna Switch Module

DATA SHEET • SKY13492-21: SP16T ANTENNA SWITCH WITH MIPI INTERFACE
Stencil aperture size for center
ground pad should be 80% to 100%
(by area) of the solder mask opening.
2X 0.45
2.8
2X 0.85
12X 0.5
16X 0.5
20X 0.2
0.4 Pitch
Pin 24
Pin 1
Pin 1 Indicator
0.30 x 45°
3.6
Stencil Aperture
Top View
Package
Outline
2.8
Pin 24
Pin 1
0.6 Pitch
3.6
Thermal Via Array, ø0.3 mm
on 0.6 mm pitch will improve
thermal performance.
NOTE: thermal vias should be
resin filled and capped according
to IPC-4761, Type VII vias.
30-35 μm Cu thickness is
recommended.
0.25 Typ.
9X 0.5
15X 0.5
18X 0.2
Opening size of
60 to 100% of exposed
center opening shown
2X 0.45
2.9
0.4 Pitch
Package
Outline
Pin 24
Pin 1
Pin 1 Indicator
0.30 x 45°
2X 0.85
12X 0.6
16X 0.6
20X 0.3
0.4 Pitch
Package
Outline
3.7
Metallization
Top View
Solder Mask Opening
Top View
All dimensions are in millimeters
Figure 10. SKY13492-21 PCB Layout Footprint
(Top View)
S3435
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
20
October 26, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202826E