SKY13492-21 Datasheet, PDF (1/23 Pages) Skyworks Solutions Inc. – 0.7 to 2.7 GHz SP16T MIPI Antenna Switch Module

DATA SHEET
SKY13492-21: 0.7 to 2.7 GHz SP16T MIPI^® Antenna Switch
Module
Applications
 2G/3G/4G multimode cellular handsets (LTE, UMTS, CDMA2000,
EDGE, GSM, TDD-LTE, TD-SCDMA)
 Embedded data cards
Features
 Dedicated Band 7 TRX ports: 0.90 dB insertion loss @ 2.7 GHz
 High isolation and linearity
 Broadband frequency range: 0.7 to 2.7 GHz
 Fourteen linear TRX ports
 Integrated low- and high-band GSM harmonic filters
 External MIPI select pin to enable multiple trigger controls
 Small MCM (24-pin, 2.5 x 3.3 x 0.8 mm) package
(MSL3, 260 C per JEDEC J-STD-020)
Skyworks Green^TM products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of Green^TM, document number
SQ04–0074.
TRX1
TRX2
TRX3
TRX4
TRX5
TRX6
TRX7
TRX8
TRX9
TRX10
TRX11
TRX12
TRX13
TRX14
TXHB
TXLB
ANT
MIPI Decoder
Description
The SKY13492-21 is a single-pole, sixteen-throw (SP16T)
antenna switch with an integrated Mobile Industry Processor
Interface (MIPI) controller. Using an advanced switching
technology, the SKY13492-21 maintains low insertion and high
isolation, which makes it an ideal choice for UMTS, CDMA2000,
EDGE, GSM, and LTE applications.
The design features two dedicated GSM transmit ports and three
dedicated ultra low-loss TRX ports. The switch also has an
excellent triple beat ratio and second/third order intermodulation
distortion (IMD2/IMD3) performance.
Figure 1. SKY13492-21 Block Diagram
Switching is controlled by the MIPI decoder. There is an external
MIPI select pin that enables how the switch responds to power
mode triggers. When this pin is grounded, the switch responds to
any of the power mode triggers. When this pin is left open, the
switch responds to individual power mode triggers. No external
DC blocking capacitors are required on the RF paths as long as no
DC voltage is applied.
The SKY13492-21 is manufactured in a compact,
2.5 x 3.3 x 0.8 mm, 24-pin surface mount Multi-Chip Module
(MCM) package.
A functional block diagram is shown in Figure 1. The pin
configuration and package are shown in Figure 2. Signal pin
assignments and functional pin descriptions are provided in
Table 1.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
202826E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 26, 2015
1