SKY65206-13 Datasheet, PDF (2/7 Pages) Skyworks Solutions Inc. – WLAN 802.11b/g Intera™ Front-End Module

DATA SHEET • SKY65206-13
Package Dimensions
10X 2.625
Detail B
4X 3
4X 2
10X 3.9
(3.53)
4X 1
12X 2.1
4X 1.05
Detail A
24X
SMT PAD
(2.6)
4X 1
4X 2
14X 3.4
4X
0.525
4X 1.575
Solder
Mask
Opening
8.0 ± 0.1
Mold
(0.45)
MCM
Substrate
1.4 ± 0.1
7.0 ± 0.1
(0.1)
Metal Pad Edge
0.5 ± 0.075
Solder Mask Opening
0.5 ± 0.03
0.85
Detail A
Detail B
Absolute Maximum Ratings
Characteristic
Value
RF input power
20 dBm
Supply voltage
4V
Supply current
600 mA
Operating temperature
-40 °C to +85 °C
Storage temperature
-65 °C to +85 °C
Moisture sensitivity level
MSL-3 @ 240 °C
θ_JC
55 °C/W
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as
possible, Electrostatic Discharge (ESD) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce poten-
tials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
Pin Descriptions
Pin Number
1, 4, 5, 7, 8,
9, 11, 19, 20,
22, 23, 24
2, 3
Symbol
GND
V_CC
6
Tx IN
10
Rx OUT
12
Tx EN
13
PD_OUT
14
V_CTL1
15
V_CTL2
16
V_CTL3
17
V_CTL4
18
ANT B
21
ANT A
Description
Equipotential point. Must be connected to
PCB ground via lowest possible impedance.
DC power supply voltage input to power
amplifier and to the internal voltage
regulator which biases the internal
directional detector. Pins are connected
together for current sharing.
Transmitter RF input port.
Nominal input impedance = 50 Ω.
Receiver RF output port.
Nominal output impedance = 50 Ω.
High impedance DC control voltage input
to enable/disable the power amplifier.
Detected output voltage from
directional detector
High impedance DC control voltage input 1
for transfer switch
High impedance DC control voltage input 2
for transfer switch
High impedance DC control voltage input 3
for transfer switch
High impedance DC control voltage input 4
for transfer switch
RF antenna I/O port B.
Nominal impedance = 50 Ω.
RF antenna I/O port A.
Nominal impedance = 50 Ω.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
2
August 21, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200102 Rev. H