SKY67159-396LF Datasheet, PDF (11/18 Pages) Skyworks Solutions Inc. – 200 to 3800 MHz Broadband Low-Noise Amplifier

DATA SHEET • SKY67159-396LF: BROADBAND LOW-NOISE AMPLIFIER
Evaluation Board Description
The SKY67159-396LF Evaluation Board is used to test the
performance of the SKY67159-396LF LNA.
An assembly drawing for the Evaluation Board is shown in
Figure 28. The layer detail is provided in Figure 29. An Evaluation
Board schematic (optimized for 700 to 2700 MHz) diagram is
provided in Figure 30. Table 6 provides the Bill of Materials (BOM)
list for the optimized frequency band (700 to 2700 MHz). An
Evaluation Board schematic (optimized for 3400 to 3800 MHz)
diagram is provided in Figure 31. Table 7 provides the Bill of
Materials (BOM) list for the optimized frequency band (3400 to
3800 MHz).
Package Dimensions
The PCB layout footprint for the SKY67159-396LF is provided in
Figure 32. Typical part markings are shown in Figure 33. Package
dimensions for the 8-pin DFN are shown in Figure 34, and tape
and reel dimensions are provided in Figure 35.
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The SKY67159-396LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
203397B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 12, 2015
11