SBB-1089Z Datasheet, PDF (5/6 Pages) SIRENZA MICRODEVICES – 50 - 850 MHz, Cascadable Active Bias InGaP HBT MMIC Amplifier

SBB-1089Z 50-850 MHz Cascadable MMIC Amplifier
Application Schematic
Vs
1uF
1200pF
4
RF in
1
3
SBB-1089
Ls
Cb
2
Evaluation Board Layout
Application Circuit Element Values
Reference
Designator
Frequency (MHz)
50 to 850
C_B
8200pF
L_C
1200nH LS Coilcraft
L_S
2.7nH Toko
Lc
RF out
Cb
Absolute Maximum Ratings
Parameter
Absolute Limit
Ma. Dvice Current (I_D)
Max Device Voltage (V_D)
Max. RF Input Power
110 mA
5.5 V
+12 dBm
Max. Operating Dissipated
Power
0.61 W
Max. Junction Temp. (T_J)
Operating Temp. Range (T_L)
Max. Storage Temp.
+150°C
-40°C to +85°C
+150°C
Operation of this device beyond any one of these limits may cause
permanent damage. For reliable continuous operation, the device
voltage and current must not exceed the maximum operating
values specified in the table on page one.
Bias Conditions should also satisfy the following expression:
I_DV_D < (T_J - T_L) / R_TH, j-l T_L=T_LEAD
ESD Class 1C
Appropriate precautions in handling, packaging and testing
devices must be observed.
Mounting Instructions
1. Solder the copper pad on the backside of the device package to
the ground plane.
2. Use a large ground pad area with many plated through-holes as
shown.
3. We recommend 1 or 2 ounce copper. Measurement for this
datasheet were made on a 31 mil thick FR-4 board with 1
ounce copper on both sides.
MSL (Moisture Sensitivity Level) Rating: Level 1
303 S. Technology Ct.
Broomfield, CO 80021
Phone: (800) SMI-MMIC
5
http://www.sirenza.com
EDS-103998 Rev D