SLX-2143 Datasheet, PDF (4/7 Pages) List of Unclassifed Manufacturers – 1700-2200 MHz High Linearity Low Noise Amplifier Module

Preliminary
SLX-2143 1700-2200 MHz LNA Module
Caution: ESD Sensitive
Appropriate precaution in handling, packaging
and testing devices must be observed.
Part Number Ordering Information
Part Number
Reel Size
Devices/Reel
SLX-2143
7”
500
Part Symbolization
The part will be symbolized with an “SLX2143” on
the top surface of the package.
Pin #
Function
Description
1
RF In
RF input pin. This pin is at DC ground. An external DC block-
ing capacitor should be used in most applications.
RF output and bias pin. Bias should be supplied to this pin
RF In
2
RF Out/
DC Input
through an external RF choke inductor. Because DC biasing is
present on this pin, a DC blocking capacitor should be used in
most applications (see application schematic). The supply
side of the bias network should be well bypassed.
3
Package Backside
GND
Connection to RF/DC ground. For best performance use via
holes as shown in recommended PCB layout to reduce induc-
tance and to provide adequate thermal path.
Device Schematic
RF Out/
DC In
Package Dimensions (“43” Ceramic Module)
Backside must connect to DC/RF ground
RF Output/
SLX-2143
DC Input
X-XXXX-X
RF
Input
YYWW
0.03
(0.76)
Solder
Outline
0.394 (10.0)
All dimensions in inches (mm)
Denotes Pin 1
PCB Front
Test PCB Pad Layout
0.4 (10.16)
0.295 (7.5)
0.275
(6.98)
0.02
(0.51)
.012 (.30)
radius
PPaCcBkaFgreonBtack
0.4 (10.16)
0₀.2_.395₇₈(7₍.5₉)_.6)
0.275
(6.98)
0.024 ^0.02
(0.62) ^(0.51)
0.04
(1.02)
0.04 (1.02)
0.015 (.38)
All plated thru holes: 0.02 (0.5) diameter.
All dimensions in inches (mm).
Board material: FR-4, 0.032 (.81) thick.
0.05 (1.27)
typical
0.03
0⁽⁰.^.0⁷2⁶8⁾ (0.70)
Solder
Outline
0.04
(⁰1^..0²2⁵)⁶
(6.5)
0.001.054⁰(.(^.31⁰8.^20)2().50)
0.₀0ty5_.0p(i31c_5a.2l7(0) _.90)
All platAedll tdhirmu ehnolseiso:n0s.0i2n(i0n.c5)hdeisam(metmer.).
All dimMenasteiornisali:nCinuchweisth(mAmu).flash.
Board material: FR-4, 0.032 (.81) thick.
522 Almanor Ave., Sunnyvale, CA 94085
Phone: (800) SMI-MMIC
4
http://www.sirenza.com
EDS-102501 Rev B