SP6128AB Datasheet, PDF (8/10 Pages) Sipex Corporation – Non-Isolated DC-DC SIP Modules:3.0Vdc-5.5Vdc In, 0.9Vdc-3.3Vdc out, 10A

This design allows user to select positive or negative logic remote control. This demo board only
implements the negative logic remote control circuit. To change to positive logic, remove Q5, R7, R8,
and R12.and add D2 andD3.
Over temperature protection:
The over temperature protection will shut down the module when abnormal high temperature is detected
by the circuit.. The module will attempt to restart once the temperature cools down. The temperature set
point can be adjusted by resistor R11.
Mechanical Outline Diagram
Dimensions are in millimeter (inch)
43.2(1.7)
13.95(5.5)
1234
567 89
*the pin out is not the same as standard
7.25(0.285)
IN
FUNCTION
1
Vo
2
Vo
3
GND
4
GND
5
GND
6
ON/OFF
7
Trim
8
Vi
9
Vi
BILL MATERIAL
8