SP6128AB Datasheet, PDF (1/10 Pages) Sipex Corporation – Non-Isolated DC-DC SIP Modules:3.0Vdc-5.5Vdc In, 0.9Vdc-3.3Vdc out, 10A

demo board for SP6128A, a synchronous buck controller
Non-Isolated DC-DC SIP Modules:
3.0Vdc-5.5Vdc In, 0.9Vdc-3.3Vdc out, 10A
FEATURES:
ƒ High Efficiency: 94.5% at 3.3V output,10A
ƒ Small size and very low profile
43.2mm× 7.25mm × 13.97mm
(1.7in × 0.285in × 0.55in)
• 3V to 5.5V input voltage
ƒ All ceramic capacitors design
ƒ Negative or Positive remote On/Off
ƒ Thermal shut down protection
ƒ Low output ripple max 20mV
ƒ Output voltage adjustable with the trim function
ƒ Low EMI noise
ƒ Short circuit and over current protection
using Hiccup mode and auto-restart
ƒ Build in UVLO function
ƒ Wide operation temperature range
-40 °C to +85 °C
ƒ ± 0.1% line regulation & ± 0.3% load
regulation
-40 °C to +85 °C
DESCRIPTION:
The SP6128A demo board design is non-isolated dc-dc SIP module with a very high efficiency at
10A output. It has smallest size comparing with the current market products with the same power
range and low EMI. Standard features include remote ON/OFF with the customer selectable
positive and negative control, output voltage adjustment, soft start, over current and over
temperature protection. This demo board proves that SP6128A is a high performance, but yet
easy to use synchronous buck controller. It simplifies low voltage DC to DC power supply
designs without compromising performance.
-1-