SP509_05 Datasheet, PDF (3/29 Pages) Sipex Corporation – Rugged 40Mbps, 8 Channel Multi-Protocol Transceiver with Programmable DCE/DTE and Termination Resistors

T_A = +25°C and V_CC = +4.75V to +5.25V unless otherwise noted.
MIN. TYP.
V.28 RECEIVER (continued)
AC Parameters (cont.)
Max.Transmission Rate 120
235
MAX.
ELECTRICAL SPECIFICATIONS
UNITS
CONDITIONS
kbps
V.10 DRIVER
DC Parameters
Outputs
Open Circuit Voltage
Test-Terminated Voltage
Short-Circuit Current
Power-Off Current
AC Parameters
Outputs
Transition Time
Propagation Delay
t_PHL
t_PLH
Max.Transmission Rate
V.10 RECEIVER
DC Parameters
Inputs
Input Current
Input Impedance
Sensitivity
AC Parameters
Propagation Delay
t_PHL
t_PLH
Max.Transmission Rate
V.11 DRIVER
DC Parameters
Outputs
Open Circuit Voltage
Test Terminated Voltage
Balance
Offset
Short-Circuit Current
Power-Off Current
AC Parameters
Outputs
Transition Time
Propagation Delay
t_PHL
t_PLH
Differential Skew
(|t_PHL - t_PLH|)
Max.Transmission Rate
Channel to Channel Skew
V.11 RECEIVER
DC Parameters
Inputs
Common Mode Range
Sensitivity
±4.0
0.9V_OC
30
30
120
–3.25
4
120
±2.0
0.5V_OC
40
–7
±6.0
±150
±100
Volts
Volts
mA
µA
200
ns
100
500
ns
100
500
ns
kbps
+3.25
±0.3
mA
kΩ
Volts
50
ns
50
ns
kbps
±6.0
0.67V_OC
±0.4
+3.0
±150
±100
Volts
Volts
Volts
Volts
Volts
mA
µA
10
ns
30
50
ns
30
50
ns
2
5
ns
Mbps
2
ns
+7
Volts
±0.2
Volts
per Figure 9
per Figure 10
per Figure 11
per Figure 12
V_CC = +5V for AC parameters
per Figure 13; 10% to 90%
per Figures 14 and 15
V_CC = +5V for AC parameters
per Figure 16
per Figure 17
per Figure 17
per Figure 17
per Figure 18
per Figure 19
V_CC = +5V for AC parameters
per Figures 21 and 36; 10% to 90%
Using C_L = 50pF;
per Figures 33 and 36
per Figures 33 and 36
per Figures 33 and 36
Date: 1/19/05
SP509 Enhanced WAN Multi–Protocol Serial Transceiver
3
© Copyright 2005 Sipex Corporation