SP26LV432_06 Datasheet, PDF (2/11 Pages) Sipex Corporation – High-Speed, Low-Power Quad RS-422 Differential Line Receiver

ABSOLUTE MAXIMUM RATINGS
These are stress ratings only and functional operation of the device at
these ratings or any other above those indicated in the operation sections
of the specifications below is not implied. Exposure to absolute maximum
rating conditions for extended periods of time may affect reliability and
cause permanent damage to the device.
VCC (Supply Voltage) ................................................................... +7.0V
VCM (Common Mode Range) ........................................................ ±14V
VDIFF (Differential Input Voltage) .................................................. ±14V
VIN (Enable Input Voltage) ................................................... VCC + 1.5V
TSTG (Storage Temperature Range) ........................... -65°C to +150°C
Maximum Current Per Output .................................................... ±25mA
Storage Temperature .................................................. -65°C to +150°C
Power Dissipation Per Package
16-pin PDIP (derate 14.3mW/ºC above +70ºC) ...................... 1150mW
16-pin NSOIC (derate 8.95mW/ºC above +70ºC) ..................... 725mW
ELECTRICAL CHARACTERISTICS
Unless otherwise noted, the following specifications apply for V_CC = +3.0V to +3.6V with T_AMB = 25°C and all MIN
and MAX limits apply across the recommended operating temperature range.
DC PARAMETERS
Supply Voltage, V_CC
Enable Input Rise or Fall Times
Input Electrical Characteristics
Minimum Differential Input Voltage, V_TH
Input Resistance, R_IN
Input Current
I_IN
I_IN
Minimum Enable HIGH Input Level Voltage,
V_IH(EN)
Maximum Enable LOW Input Level Voltage,
V_IL(EN)
Maximum Enable Input Current, I_EN
Input Hysteresis, V_HYST
Quiescent Supply Current, I_CC
Output Electrical Characteristics
Minimum High Level Output Voltage, V_OH
Maximum Low Level Output Voltage, V_OL
Maximum Tri-state Output Leakage Current,
I_OZQ
MIN. TYP. MAX. UNITS
3.0
3.6 V
3
ns
CONDITIONS
-200 50 +200 mV V_OUT = V_OH or V_OL,
-7V < V_CM < +7V
5.0
KΩ V_IN = -7V, +7V, +10V
other input = GND
+1.25 +1.5
-1.5 -2.5
2.0
mA V_IN = +10V, other input = GND
mA V_IN = -10V, other input = GND
V
0.8 V
±1.0
60
5 15
µA V_IN = V_CC or GND
mV V_CM = 0V
mA V_CC = +3.3V, V_DIF = +1V
2.4 2.8
0.2 0.5
±0.5 ±5.0
V V_CC = +3.0V, V_DIFF = +1V,
I_OUT = -6mA
V V_CC = +3.0V, V_DIFF = -1V,
I_OUT = +6mA
µA V_OUT = V_CC or GND,
ENABLE = V_IL, ENABLE = V_IH
Date: 04/27/06
SP26LV432 High Speed, Low Power Quad Differential Line Receiver
2
© Copyright 2006 Sipex Corporation