SP2209E Datasheet, PDF (2/15 Pages) Sipex Corporation – High ESD Dual Port RS-232 Transceiver

ABSOLUTE MAXIMUM RATINGS
These are stress ratings only and functional operation
of the device at these ratings or any other above those
indicated in the operation sections of the specifications
below is not implied. Exposure to absolute maximum
rating conditions for extended periods of time may
affect reliability and cause permanent damage to the
device.
V_DD......................................................-0.3V to +14.0V
V_STBY........................................................-0.3V to +7V
Input Voltages
T_XINA........................................-0.3V to (V_STBY + 0.3V)
T_XINB........................................-0.3V to (V_STBY + 0.3V)
R_XINA..................................................................+15V
R_XINB..................................................................+15V
Output Voltages
T_XOUTA..............................................................+15V
T_XOUTB..............................................................+15V
R_XOUTA...................................-0.3V to (V_STBY + 0.3V)
R_XOUTB...................................-0.3V to (V_STBY + 0.3V)
Short-Circuit Duration
T_XOUTA....................................................Continuous
T_XOUTB....................................................Continuous
Storage Temperature........................-65°C to +150°C
Power Dissipation per package
38-pin TSSOP (derate 14.3mW/^oC above +70^oC).....1200mW
SPECIFICATIONS
Unless otherwise noted, the following specifications apply for V_DD = +12.0V + 10%, V_STBY = +3.3V + 5% or +5V + 10%,
C1 = C2 = 0.1µF, and T_AMB = T_MIN to T_MAX.
PARAMETER
MIN. TYP. MAX. UNITS CONDITIONS
DC CHARACTERISTICS
Supply Current
5
Standby Supply Current, V_STBY
100 200
CMOS LOGIC INPUTS AND RECEIVER OUTPUTS
mA
no load, all driver inputs at 0.4V or 2.1V,
all receiver inputs at +15V or -15V
µA no load, all driver inputs at V_STBY or open
Input Logic Threshold Voltage
LOW
0.4
HIGH
2.1
Input Leakage Current
10
25
V
T_AMB = 25^oC
µA Driver input at 0V
Output Voltage LOW
Output Voltage HIGH
Output Leakage Current
0.2 0.4
2.4
+0.05 +5
V
I_OL = +1.6mA
V
I_OH = -40µA
µA V_DD = 0V, (except R₅OUTA and R₅OUTB)
SP2209E DS/06
SP2209E High ESD Dual Port RS-232 Transceivers
2
© Copyright 2000 Sipex Corporation