English
Language : 

SP207E Datasheet, PDF (2/16 Pages) Sipex Corporation – +5V High Performance RS232 Transceivers
ABSOLUTE MAXIMUM RATINGS
These are stress ratings only and functional
operation of the device at these or any other
above those indicated in the operation sections
of the specifications below is not implied. Exposure
to absolute maximum rating conditions for extended
periods of time may affect reliability.
VCC .................................................................. +6V
V+ ....................................... (VCC – 0.3V) to +13.2V
V– ................................................................ 13.2V
Input Voltages
TIN .......................................... –0.3V to (VCC +0.3V)
RIN ................................................................ ±20V
Output Voltages
TOUT ................................ (V+, +0.3V) to (V–, –0.3V)
ROUT ....................................... –0.3V to (VCC +0.3V)
Short Circuit Duration on TOUT .............. Continuous
Power Dissipation Per Package
24-pin SSOP (derate 11.2mW/oC above +70oC)....900mW
24-pin PDIP (derate 15.9mW/oC above +70oC)....1300mW
24-pin SOIC (derate 12.5mW/oC above +70oC)...1000mW
28-pin SSOP (derate 11.2mW/oC above +70oC)....900mW
28-pin SOIC (derate 12.7mW/oC above +70oC)...1000mW
.SPECIFICATIONS
VCC at nominal ratings; 0.1µF charge pump capacitors; TMIN to TMAX, unless otherwise noted.
PARAMETER
MIN. TYP. MAX.
TTL INPUTS
Logic Threshold
VIL
VIH
Logic Pullup Current
Maximum Transmssion Rate
TTL OUTPUTS
Compatibility
VOL
VOH
Leakage Current
0.8
2.0
15
200
120
230
TTL/CMOS
0.4
3.5
0.05
+10
UNIT
Volts
Volts
µA
kbps
Volts
Volts
µA
RS232 OUTPUT
Output Voltage Swing
+5
+7
Output Resistance
300
Output Short Circuit Current
+25
RS232 INPUT
Voltage Range
Voltage Threshold
Low
High
Hysteresis
Resistance
–15
+15
0.8
1.2
1.7
2.8
0.2
0.5
1.0
3
5
7
DYNAMIC CHARACTERISTICS
Driver Propagation Delay
Receiver Propagation Delay
Instantaneous Slew Rate
1.5
0.5
1.5
30
Transition Time
1.5
Output Enable Time
400
Output Disable Time
250
Volts
Ω
mA
Volts
Volts
Volts
Volts
kΩ
µs
µs
V/µs
µs
ns
ns
CONDITIONS
TIN, EN, SD
TIN = 0V
CL = 1000pF, RL = 3KΩ
IOUT = 3.2mA; VCC = +5V
IOUT = –1.0mA
0V ≤ ROUT ≤ VCC ; SP211 EN = 0V;
SP213 EN = VCC
TA = +25°C
All transmitter outputs loaded
with 3KΩ to ground
VCC = 0V; VOUT = +2V
Infinite duration, VOUT = 0V
VCC = 5V, TA = +25°C
VCC = 5V, TA = +25°C
VCC = +5V
VIN =+15V; TA = +25°C
TTL–to–RS-232
RS-232–to–TTL
CL = 50pF, RL = 3–7KΩ;
TA = +25°C; from +3V
CL = 2,500pF, RL = 3KΩ;
measured from +3V to –3V
or –3V to +3V
SP207EDS/09
SP207E Series High Performance RS232 Transceivers
2
© Copyright 2000 Sipex Corporation