SP200 Datasheet, PDF (2/15 Pages) Sipex Corporation – +5V High-Speed RS-232 Transceivers with 0.1uF Capacitors

ABSOLUTE MAXIMUM RATINGS
These are stress ratings only and functional operation of the device
at these or any other above those indicated in the operation
sections of the specifications below is not implied. Exposure to
absolute maximum rating conditions for extended periods of time
may affect reliability.
V_CC ............................................................................................ +6V
V⁺ ................................................................. (V_CC – 0.3V) to +13.2V
V^– ........................................................................................... 13.2V
Input Voltages
T_IN ................................................................... –0.3V to (V_CC +0.3V)
R_IN ........................................................................................... ±20V
Output Voltages
T_OUT .......................................................... (V⁺, +0.3V) to (V^–, –0.3V)
R_OUT ................................................................. –0.3V to (V_CC +0.3V)
Short Circuit Duration on T_OUT ....................................... Continuous
Power Dissipation
Plastic DIP .......................................................................... 375mW
(derate 7mW/°C above +70°C)
Small Outline ...................................................................... 375mW
(derate 7mW/°C above +70°C)
SPECIFICATIONS
V_CC at nominal ratings; 0.1µF charge pump capacitors; T_MIN to T_MAX, unless otherwise noted.
PARAMETER
TTL INPUTS
Logic Threshold
V_IL
V_IH
Logic Pullup Current
Maximum Data Rate
TTL OUTPUTS
Compatibility
V_OL
V_OH
Leakage Current
MIN. TYP. MAX.
0.8
2.0
15
200
120
TTL/CMOS
0.4
3.5
0.05
±10
RS-232 OUTPUT
Output Voltage Swing
±5
±7
Output Resistance
300
Output Short Circuit Current
±25
RS-232 INPUT
Voltage Range
Voltage Threshold
LOW
HIGH
Hysteresis
Resistance
–15
+15
0.8
1.2
1.7
2.4
0.2
0.5
1.0
3
5
7
DYNAMIC CHARACTERISTICS
Propagation Delay
Instantaneous Slew Rate
1.5
30
Transition Region Slew Rate
5
UNIT
Volts
Volts
µA
kbps
Volts
Volts
µA
Volts
Ohms
mA
Volts
Volts
Volts
Volts
kΩ
µs
V/µs
V/µs
Output Enable Time
400
ns
Output Disable Time
250
ns
CONDITIONS
T_IN, EN, SD
T_IN = 0V
C_L = 2,500pF, R_L = 3kΩ
I_OUT = 3.2mA; V_CC = +5V
I_OUT = –1.0mA
EN = V_CC; 0V ≤ V_OUT ≤ V_CC ;
T_A = +25°C
All transmitter outputs loaded
with 3kΩ to ground
V_CC = 0V; V_OUT = ±2V
Infinite duration
V_CC = 5V, T_A = +25°C
V_CC = 5V, T_A = +25°C
V_CC = +5V
±15V; T_A = +25°C
RS-232–to–TTL
C_L = 50pF, R_L = 3–7kΩ;
T_A = +25°C
C_L = 2,500pF, R_L = 3kΩ;
measured from +3V to –3V
or –3V to +3V
REV: A DATE:12/03/2003
+5V High-Speed RS232 Transceivers
2
© Copyright 2000 Sipex Corporation