SP3070-3078E Datasheet, PDF (13/19 Pages) Sipex Corporation – 15kV ESD-Protected, 3.3V, 1/8 Load, Failsafe RS-485/RS422 Transceivers

PIN DESCRIPTION
FULL DUPLEX
DEVICES
HALF
DUPLEX
DEVICES
SP3070E SP3071E SP3072E
SP3073E SP3074E SP3075E
SP3076E SP3077E SP3078E
PIN NUMBER
2
2
1
3
-
2
4
-
3
5
3
4
6, 7
4
5
9
5
-
10
6
-
11
7
-
-
-
7
12
8
-
-
-
6
14
1
8
1, 8, 13
-
-
PIN
NAME
PIN FUNCTION
RO
Receiver Output. When RE is low and if (A – B) ≥
-50mV, RO is High. If (A – B) ≤ - 200mV, RO is low.
Receiver Output Enable. When RE is low, RO is enabled.
RE
When RE is high, RO is high impedance. RE should be
high and DE low to enter shutdown mode. RE is a hot-
swap input.
Driver Output Enable. When DE is high, outputs are
DE
enabled. When DE is low, outputs are high impedance. DE
should be low and RE high to enter shutdown mode. DE is
a hot-swap input.
Driver Input. With DE high, a low level on DI forces
DI
noninverting output low and inverting output high. Similarly,
a high level on DI forces noninverting output high and
inverting output low.
GND Ground
Y Noninverting Driver Output
Z Inverting Driver Output
B Inverting Receiver Input
B Inverting Receiver Input and Inverting Driver Output
A Noninverting Receiver Input
A
Noninverting Receiver Input and Noninverting Driver
Output
V_CC
Positive Supply V_CC. Bypass V_CC to GND with a 0.1uF
capacitor.
NC No Connect
Date: 03/28/05
SP3070E - SP3078E Family, ±15kV ESD-Protected, Failsafe RS-485/RS422 Transceivers
13
© Copyright 2005 Sipex Corporation