|
SP6330 Datasheet, PDF (1/13 Pages) Sipex Corporation – Quad μPower Supervisory Circuits with Manual Reset & Watchdog | |||
|
SP6330, SP6332
and SP6334
Quad µPower Supervisory Circuits
with Manual Reset & Watchdog
FEATURES
â Low operating voltage of 1.6V
â Low operating current of 20µA typical
â Monitors up to four supplies simultaneously
â Adjustable inputs monitor down to 0.5V
â Reset asserted down to 0.9V
â 2% accuracy over temperature range
â Open Drain (OD) or CMOS RSTB output or
CMOS RST output
â 4 Reset Timeout Periods:
50ms, 100ms, 200ms and 400ms
â Watch Dog Input Functionality -- WDI
â Manual Reset Input (Active Low) -- MRIB
â 8 Pin TSOT package
V1 1
V2 2
MRIB 3
V3 4
SP6330
8 Pin TSOT
8 RSTB
7 WDI
6 GND
5 V4
Open Drain RESET
SEE PAGE 2 FOR OTHER
AVAILABLE PINOUTS
Available in Lead Free Packaging
DESCRIPTION
SP6330-SP6332- SP6334 Quad Power Supervisory Circuit Family is a family of
microprocessor reset supervisory circuits with multiple reset voltages. The family provides
low voltage monitoring ability for up-to four supplies with two precision factory-set thresholds
and two user defined custom thresholds. These circuits perform a single function: if any of
the input supply voltages drops below its associated threshold, reset outputs are asserted.
The SP6330, SP6332, and SP6334 are packaged in an 8-pin TSOT package. All devices are
fully specified over -40oC to +85oC temperature range.
TYPICAL APPLICATION CIRCUIT
Nov20-06 Rev M
SP6330/32/34 Quad Power Supervisory Circuit Family
1
© Copyright 2006 Sipex Corporation
|
▷ |