SI477X-EVB Datasheet, PDF (9/62 Pages) Silicon Laboratories – Complete antenna-to-audio evaluation system

Si477x-EVB
f. Firmware selection: The firmware for the tuner (or tuners in multi-tuner configurations) may be
selected by selecting the appropriate Tuner tab as shown in Figure 9. “Firmware Configuration
Window”. In particular,
i. Select either the firmware image in the chip's NVRAM by selecting From Device or
ii. Select a firmware image from a list of options.
g. Part Number and I²C address for the selected device. These are read back/configured automatically
from the tuner or ID EEPROM on the daughtercard.
h. Default Mode: UI default mode allows the selection of the UI configuration as a default for the part
number, last used UI state, or you can select a configuration previously saved (see Figure 8). For
saving a UI configuration, see Section 5.1.
Figure 8. Default Mode Selection
Rev. 0.4
9