SI477X-EVB Datasheet, PDF (12/62 Pages) Silicon Laboratories – Complete antenna-to-audio evaluation system

Si477x-EVB
5.2. Retrieving the Configuration State
This feature allows the user to retrieve the configuration state.
1. Go to File  Initialize Tuner 1 tab as shown in Figure 12. The different states which were saved before
are available in the default mode for user selection.
Figure 12. Saved Configuration State
2. In Figure 13 below configuration state My Configuration is selected. Once the selection is made, click on
Initialize and the part will boot with the property values stored in the My Configuration state.
Figure 13. Power Up from Saved Configuration State
12
Rev. 0.4