|
SI5344-EVB Datasheet, PDF (8/19 Pages) Silicon Laboratories – Powered from USB port or external power supply | |||
|
◁ |
Si5344-EVB
10.3. Common ClockBuilderProTM Work Flow Scenarios
There are three common workflow scenarios when using CBPro and the Si5344 EVB. These workflow scenarios
are as follows:
ï® Workflow Scenario #1: Testing a Silicon Labs-created Default Configuration
ï® Workflow Scenario #2: Modifying the Default Silicon Labs-created Device Configuration
ï® Workflow Scenario #3: Testing a User-created Device Configuration
Each is described in more detail in the following sections.
10.3.1. Workflow Scenario #1: Testing a Silicon Labs Created Default Configuration
The flow for using the EVB GUI to initialize and control a device on the EVB is as follows.
1. Once the PC and EVB are connected, launch ClockBuilder Pro by clicking on this icon on your PCâs
desktop.
Figure 9. ClockBuilderPro Desktop Icon
2. When the EVB is detected, click on the Open Default Plan button on the Wizardâs main menu. CBPro
automatically detects the EVB and device type.
Figure 10. Open Default Plan
8
Rev. 1.0
|
▷ |