SI5344-EVB Datasheet, PDF (13/19 Pages) Silicon Laboratories – Powered from USB port or external power supply

Si5344-EVB
10.3.2. Workflow Scenario #2: Modifying the Default Silicon Labs Created Device Configuration
To modify the “default” configuration using the CBPro Wizard, click on Edit Configuration with Wizard.
Figure 18. Edit Configuration with Wizard
You will now be taken to the Wizard’s step-by-step menus to allow you to change any of the default plan’s
operating configurations.
Figure 19. Design Wizard
Note: You can click on the icon on the lower left hand of the menu to confirm that your frequency plan is valid. After making
your desired changes, you can click on Write to EVB to update the DUT to reconfigure your device in real-time. The
Design Write status window opens each time you make a change.
Rev. 1.0
13