SI535 Datasheet, PDF (7/12 Pages) Silicon image – ULTRA LOW JITTER CRYSTAL OSCILLATOR (XO)

Si535/536
3. Ordering Information
The Si535/536 XO supports a variety of options including frequency, temperature stability, output format, and V_DD.
The Si535 and Si536 XO series are supplied in an industry-standard, RoHS compliant, 6-pad, 5 x 7 mm package.
The Si536 Series supports an alternate OE pinout (pin #1) for the LVPECL and LVDS output formats. See Tables 9
and 10 for the pinout differences between the Si535 and Si536 series.
53x
X
X
XXXMXXX
D
G
R
Device Output Enable
535
pin 2
536
pin 1
Tape & Reel Packaging
Blank = Trays
Operating Temp Range (°C)
G
-40 to +85 °C
1^st Option Code
V_DD Output Format Output Enable Polarity
A 3.3 LVPECL
High
B 3.3 LVDS
High
E 2.5 LVPECL
High
F 2.5 LVDS
High
Part Revision Letter
Frequency (e.g., 156M250 is 156.250 MHz)
Select frequencies available in the frequency range 100 to 312.5 MHz
are listed below. Frequencies requiring greater than 6 digit resolution
are assigned a six digit code.
Available Frequencies Frequency Order Code
100.000 MHz
106.250 MHz
125.000 MHz
150.000 MHz
155.520 MHz
156.250 MHz
156.2578 MHz
156.2539 MHz
156.26953 MHz
159.375 MHz
161.1328 MHz
166.6286 MHz
167.3316 MHz
212.500 MHz
312.500 MHz
100M000
106M250
125M000
150M000
155M520
156M250
000305
000335
000338
159M375
000174
000118
000119
212M500
312M500
2^nd Option Code
Code Temperature Stability (ppm, max, ±) Total Stablility (ppm, max, ±)
B
20
31 .5
C
7
20
Example P/N: 535AB156M250DGR is a 5 x 7 XO in a 6 pad package. The frequency is 156.250 MHz, with a 3.3 V supply, LVPECL output,
and Output Enable active high polarity. Temperature stability is specifed as ±20 ppm. The part is specified for –40 to +85 °C ambient
temperature range operation and is shipped in tape and reel format.
Figure 2. Part Number Convention
Rev. 1.1
7