EFM32WG360 Datasheet, PDF (59/75 Pages) Silicon Laboratories – Operation from backup battery when main power drains out

Alternate
Functionality
0
OPAMP_N2
PD3
DAC0_OUT0 /
OPAMP_OUT0
PB11
DAC0_OUT0ALT /
OPAMP_OUT0ALT
PC0
DAC0_OUT1 /
OPAMP_OUT1
PB12
DAC0_OUT1ALT /
OPAMP_OUT1ALT
PC12
OPAMP_OUT2 PD5
DAC0_P0 /
OPAMP_P0
PC4
DAC0_P1 /
OPAMP_P1
PD6
OPAMP_P2
PD4
DBG_SWCLK
PF0
DBG_SWDIO
PF1
DBG_SWO
PF2
ETM_TCLK
ETM_TD0
ETM_TD1
ETM_TD2
ETM_TD3
GPIO_EM4WU0
GPIO_EM4WU1
GPIO_EM4WU2
GPIO_EM4WU3
GPIO_EM4WU4
GPIO_EM4WU5
PD7
PD6
PD3
PD4
PD5
PA0
PA6
PC9
PF1
PF2
PE13
HFXTAL_N
PB14
HFXTAL_P
I2C0_SCL
I2C0_SDA
I2C1_SCL
I2C1_SDA
LES_ALTEX0
LES_ALTEX1
LES_ALTEX2
LES_ALTEX3
LES_ALTEX4
PB13
PA1
PA0
PC5
PC4
PD6
PD7
PA3
PA4
PA5
...the world's most energy friendly microcontrollers
LOCATION
1
2
3
4
PC1
PC2 PC3 PD0
PC13
PD0
PC14 PC15 PD1
5
6
Description
Operational Amplifier 2 external negative input.
Digital to Analog Converter DAC0_OUT0 /
OPAMP output channel number 0.
Digital to Analog Converter DAC0_OUT0ALT /
OPAMP alternative output for channel 0.
Digital to Analog Converter DAC0_OUT1 /
OPAMP output channel number 1.
Digital to Analog Converter DAC0_OUT1ALT /
OPAMP alternative output for channel 1.
Operational Amplifier 2 output.
Operational Amplifier 0 external positive input.
PF0
PF0 PF0
PF1
PF1 PF1
PC15 PD1 PD2
PC6 PA6
PC7 PA2
PD3 PA3
PD4 PA4
PD5 PA5
PD7
PC7
PC1
PD6
PC6
PC0
PB12
PB11
Operational Amplifier 1 external positive input.
Operational Amplifier 2 external positive input.
Debug-interface Serial Wire clock input.
Note that this function is enabled to pin out of reset, and
has a built-in pull down.
Debug-interface Serial Wire data input / output.
Note that this function is enabled to pin out of reset, and
has a built-in pull up.
Debug-interface Serial Wire viewer Output.
Note that this function is not enabled after reset, and must
be enabled by software to be used.
Embedded Trace Module ETM clock .
Embedded Trace Module ETM data 0.
Embedded Trace Module ETM data 1.
Embedded Trace Module ETM data 2.
Embedded Trace Module ETM data 3.
Pin can be used to wake the system up from EM4
Pin can be used to wake the system up from EM4
Pin can be used to wake the system up from EM4
Pin can be used to wake the system up from EM4
Pin can be used to wake the system up from EM4
Pin can be used to wake the system up from EM4
High Frequency Crystal negative pin. Also used as exter-
nal optional clock input pin.
High Frequency Crystal positive pin.
PF1 PE13 I2C0 Serial Clock Line input / output.
PF0 PE12 I2C0 Serial Data input / output.
I2C1 Serial Clock Line input / output.
I2C1 Serial Data input / output.
LESENSE alternate exite output 0.
LESENSE alternate exite output 1.
LESENSE alternate exite output 2.
LESENSE alternate exite output 3.
LESENSE alternate exite output 4.
2014-10-15 - EFM32WG360FXX - d0283_Rev1.00
59
www.silabs.com