EFM32G230 Datasheet, PDF (57/70 Pages) Silicon Laboratories – Wake-up Interrupt Controller

Figure 5.3. QFN64 PCB Stencil Design
a
...the world's most energy friendly microcontrollers
b
x
y
e
c
z
d
Table 5.3. QFN64 PCB Stencil Design Dimensions (Dimensions in mm)
Symbol
a
b
c
d
Dim. (mm)
0.75
0.22
0.50
8.90
Symbol
e
x
y
z
1. The drawings are not to scale.
2. All dimensions are in millimeters.
3. All drawings are subject to change without notice.
4. The PCB Land Pattern drawing is in compliance with IPC-7351B.
5. Stencil thickness 0.125 mm.
6. For detailed pin-positioning, see Figure 4.2 (p. 54) .
Dim. (mm)
8.90
2.70
2.70
0.80
5.2 Soldering Information
The latest IPC/JEDEC J-STD-020 recommendations for Pb-Free reflow soldering should be followed.
Place as many and as small as possible vias underneath each of the solder patches under the ground
pad.
2015-05-22 - EFM32G230FXX - d0005_Rev1.90
57
www.silabs.com