English
Language : 

EFM32GG230 Datasheet, PDF (30/70 Pages) List of Unclassifed Manufacturers – High Performance 32-bit processor up to 48 MHz
...the world's most energy friendly microcontrollers
Symbol
Parameter
Condition
Min
Typ
Max
Unit
200 kSamples/s, 12 bit, single
ended, VDD reference
200 kSamples/s, 12 bit, differ-
ential, internal 1.25V reference
76
dBc
79
dBc
200 kSamples/s, 12 bit, differ-
ential, internal 2.5V reference
79
dBc
200 kSamples/s, 12 bit, differ-
ential, 5V reference
78
dBc
VADCOFFSET Offset voltage
200 kSamples/s, 12 bit, differ-
ential, VDD reference
200 kSamples/s, 12 bit, differ-
ential, 2xVDD reference
After calibration, single ended
After calibration, differential
68
79
79
0.3
-3
0.3
dBc
dBc
mV
3 mV
TGRADADCTH
Thermometer out-
put gradient
-1.92
-6.3
mV/°C
ADC
Codes/
°C
DNLADC
Differential non-lin-
earity (DNL)
-1
±0.7
4 LSB
INLADC
Integral non-linear-
ity (INL), End point
method
±1.2
±3.0 LSB
MCADC
GAINED
No missing codes
Gain error drift
1.25V reference
2.5V reference
11.9991
12
0.012
0.012
bits
0.0333 %/°C
0.033 %/°C
OFFSETED Offset error drift
1.25V reference
2.5V reference
0.22
0.73 LSB/°C
0.22
0.623 LSB/°C
1On the average every ADC will have one missing code, most likely to appear around 2048 +/- n*512 where n can be a value in
the set {-3, -2, -1, 1, 2, 3}. There will be no missing code around 2048, and in spite of the missing code the ADC will be monotonic
at all times so that a response to a slowly increasing input will always be a slowly increasing output. Around the one code that is
missing, the neighbour codes will look wider in the DNL plot. The spectra will show spurs on the level of -78dBc for a full scale
input for chips that have the missing code issue.
2Typical numbers given by abs(Mean) / (85 - 25).
3Max number given by (abs(Mean) + 3x stddev) / (85 - 25).
The integral non-linearity (INL) and differential non-linearity parameters are explained in Figure 3.14 (p.
31) and Figure 3.15 (p. 31) , respectively.
2014-05-23 - EFM32GG230FXX - d0035_Rev1.30
30
www.silabs.com