EZR32WG-490MHZ Datasheet, PDF (23/29 Pages) Silicon Laboratories – Advanced Energy Monitoring

10. Integrated Development Environments
EZR32WG 490MHz Wireless Starter Kit
Integrated Development Environments
Figure 10.1. Simplicity Studio
Simplicity Studio includes various examples in source form to use with the Starter Kit. To run these examples:
1. Provide power to the board by connecting the DBG USB connector to the PC using the provided USB cable.
2. Move the switch to the AEM position.
3. Click the [Refresh detected hardware] button and select the WSTK6223 kit under [Detected Hardware].
4. Click the [Software Examples] tile under [Software and Kits].
5. In the wizard, select the WSTK6223 kit and click [Next].
6. Select the desired example or demo from the list and click [Next].
7. Click [Finish].
8. Click the [Debug] button in the IDE to build and download the code to the hardware.
9. Follow the instructions at the top of the main example file to set up the hardware as needed.
10. Click the [Resume] button to start running the example.
10.1 IAR Embedded Workbench for ARM
An evaluation version of IAR Embedded Workbench for ARM is included on a CD in the WSTK6223 package. Check the quick start
guide for where to find updates, and IAR's own documentation on how to use it. You will find the IAR project file in the
iar
subfolder of each project
silabs.com | Smart. Connected. Energy-friendly.
Rev. 1.2 | 20