EZRADIOPRO-DK Datasheet, PDF (2/17 Pages) –

EZRadioPRO-DK
2. Software Setup
There are two software tools provided by Silicon Labs to aid in EZRadioPRO software development, the Wireless
Development Suite (WDS) and the Silicon Labs Integrated Development Environment (IDE). The recommended
starting point for EZRadioPRO development is the WDS software tool. This tool is able to identify the connected
boards by reading their identification memories (EBID) and provides valuable help by greatly simplifying radio
configuration, evaluation, and application development.
2.1. Hardware and Software Requirements for WDS
The following hardware and software is required to run the WDS:
Windows XP or later
Microsoft .NET framework 3.5 or later
Silicon Labs CP210x VCP driver
WDS v3.2.7.0 or later
The lack of the .NET framework and VCP driver are recognized during the WDS installation. The install wizard will
install the missing components after prompting the user for consent.
2.2. Download WDS
WDS can be obtained from the Silicon Labs web site free of charge at
http://www.silabs.com/Support%20Documents/Software/WDS3-Setup.exe
2.3. Installation Steps
If WDS is already installed on your machine, skip this section.
Note: Before installing this software, local administration rights must be obtained from your network administrator.
1. Start WDS3-Setup.exe.
2. Click “Next” to start the installation process.
3. Accept the license agreement by clicking the check box, and then press the “Next” button.
4. Select the installation folder.
It is recommended to use the default folder, C:\Program Files\Silabs\WDS3
5. When your settings are confirmed, click “Install” to continue.
6. Click “Finish” to close the WDS Installer.
2
Rev. 0.5