SI4455-B1A-FM Datasheet, PDF (18/40 Pages) Silicon Laboratories – EASY-TO-USE, LOW-CURRENT OOK/(G)FSK SUB-GHZ TRANSCEIVER

Si4455
4. Configuration Options and User Interface
4.1. Radio Configuration Application (RCA) GUI
The Radio Configuration Application (RCA) GUI is part of the Wireless Development Suite (WDS) program. This
setup interface provides an easy path to quickly selecting and loading the desired configuration for the device. The
RCA allows for two different methods for device setup. One option is the configuration table, which provides a list of
preloaded, common configurations. A second option allows for custom configurations to be loaded. After the
desired configuration is selected, the RCA automatically creates the EZConfig configuration array that will be
passed to the chip for setup. The program then gives the option to load a sample project with the selected
configuration onto the evaluation board or launch IDE with the new configuration array preloaded into the user
program. For more information on EZConfig usage, refer to application note, “AN692: Si4355/Si4455 Programming
Guide”.
Figure 5. Device Configuration Options
18
Rev 1.1