SI7013EVB-UDP-M3L1 Datasheet, PDF (16/26 Pages) Silicon Laboratories – Si7013EVB-UDP-M3L1 Users Guide

Si7013EVB-UDP-M3L1
4.7.2.1.2. Sensor Data
The Sensor Data box shown in Figure 12 displays the current humidity and temperature.
Figure 12. Sensor Data Box
This box displays the temperature and humidity from the most recent sample.
The Celsius and Fahrenheit radio buttons select whether the temperatures displayed in this box, the Thresholds
box, and the Log Data box are in Celsius or Fahrenheit. These radio buttons do not affect how temperatures are
displayed in the LCD.
4.7.2.1.3. Data Logger Time
The Data Logger Time box shown in Figure 13 is used to set the time in the Data Logger firmware.
Figure 13. Data Logger Time Box
The upper part of this box displays the current time and current time zone of the Data Logger firmware.
The 12 Hour and 24 Hour radio buttons select the format of the time displayed in this box and in the Log Data box.
The “Set Data Logger to PC Time” button sets the time of the Data Logger firmware to the time of the PC. This
button also sets the time zone in the Data Logger firmware to the time zone of the PC.
The Data Logger firmware does not use the time zone information; it is simply used to document the context of the
time stamps in case the Data Logger travels to different time zones.
4.7.2.1.4. Sample Interval
The Sample Interval box shown in Figure 14 is used to configure how often samples are taken.
Figure 14. Data Logger Time Box
This text box displays the current setting of the sample interval. To change the sample interval, enter a number into
the text box, select “Seconds” or “Minutes”, and then click on the “Set” button. The sample interval may be from 1
second to 1092 minutes (18 hours).
16
Rev. 0.2