SI57X-EVB Datasheet, PDF (14/34 Pages) Silicon Laboratories – Si57X/598/599 ANY FREQUENCY I2C PROGRAMMABLE XO/VCXO EVALUATION BOARD

Si57x-EVB
5. The operating system will install the driver. Click Finish in the last wizard window.
Verify the driver is installed by opening the Device Manager and expanding the "Universal Serial Bus controllers"
section. The USBXpress entry should exist as shown in the figure. This entry appears only when the board is
connected to the PC via USB, and powered on.
Figure 8. USBXpress Driver Entry in the Device Manager
4.4. EVB Software Installation
The software may be installed from a CD packaged with the EVB kit. This software may also come via a zip file.
The installation is similar regardless of how the software is distributed.
To install:
1. Navigate to the Software directory.
2. Double-click on the Setup.exe file.
3. Follow the steps in the wizard to install the program.
Note: Use the default installation location for best results.
4. After the installation is complete, click on StartProgramsSilicon LaboratoriesProgrammable
Oscillator Software. Select one of the programs to control the EVB and device.
5. Refer to the online help in each program by clicking HelpHelp in the menu.
To uninstall:
1. Open Add/Remove Programs in the Windows' Control Panel.
2. Select Programmable Oscillator Software in the list.
3. Click Remove.
4. Follow the steps in the Wizard for complete removal.
14
Rev. 0.2