SI87XX Datasheet, PDF (1/36 Pages) Silicon Laboratories – 5 KV LED EMULATOR INPUT, OPEN COLLECTOR OUTPUT ISOLATORS

Si87xx
5 KV LED EMULATOR INPUT, OPEN COLLECTOR
OUTPUT ISOLATORS
Features
 Pin-compatible, drop-in upgrades for  Wide range of product options
popular high-speed digital
 1 channel diode emulator input
optocouplers
 Performance and reliability
advantages vs. optocouplers
 3 to 30 V open collector output
 Propagation delay 30 ns
Resistant to temperature, age and ^{ Data rates dc to 15 Mbps}
forward current effects
 3.75 and 5 kV reinforced isolation
10x lower FIT rate for longer
UL, CSA, VDE
service life
 Wide operating temperature range
Higher common-mode transient
immunity: >50 kV/µs typical
Lower power and forward input
diode current
 PCB footprint compatible with
optocoupler packaging
–40 to +125 °C
 RoHS-compliant packages
SOIC-8
DIP8
SDIP6
LGA8
Applications
 Industrial automation
 Isolated data acquisition
 Motor controls and drives
 Test and measurement equipment
 Isolated switch mode power supplies
Safety Regulatory Approvals (Pending)
 UL 1577 recognized
Up to 5000 Vrms for 1 minute
 CSA component notice 5A
approval
IEC 60950-1, 61010-1, 60601-1
(reinforced insulation)
 VDE certification conformity
IEC 60747-5-2 (VDE 0884 Part 2)
(reinforced insulation)
 CQC certification approval
GB4943.1
Description
The Si87xx isolators are pin-compatible, one-channel, drop-in
replacements for popular optocouplers with data rates up to 15 Mbps.
These devices isolate high-speed digital signals and offer performance,
reliability, and flexibility advantages not available with optocoupler
solutions. The Si87xx series is based on Silicon Labs' proprietary CMOS
isolation technology for low-power and high-speed operation and are
resistant to the wear-out effects found in optocouplers that degrade
performance with increasing temperature, forward current, and device
age. As a result, the Si87xx series offer longer service life and
dramatically higher reliability compared to optocouplers. Ordering options
include open collector output with and without integrated pull-up resistor
and output enable options.
Pin Assignments:
See page 18
SOIC-8, DIP8, LGA8
Open Collector Output
SDIP6
Open Collector Output
SOIC-8, DIP8, LGA8
Open Collector Output
with 20 k Pull-up Resistor
SOIC-8, DIP8, LGA8
Open Collector Output
with Output Enable
Patent pending
Preliminary Rev. 0.5 9/12
Copyright © 2012 by Silicon Laboratories
Si87xx
This information applies to a product under development. Its characteristics and specifications are subject to change without notice.