SI5316-EVB Datasheet, PDF (1/26 Pages) Silicon Laboratories – The Si531x/2x Any-Frequency Precision Clocks

Si5316-EVB Si5319-EVB
Si5322/23-EVB Si5324-EVB
Si5325/26-EVB Si5327-EVB
Si5316, Si5319, Si5322/23, Si5324, Si5325/26, AND
Si5327 EVB USER’S GUIDE
1. Introduction
The Si5316-EVB, Si5319-EVB, Si5322/23-EVB, Si5324-EVB, Si5325/26-EVB, and Si5327-EVB provide platforms
for evaluating Silicon Laboratories' Si5316, Si5319, Si5322/Si5323, Si5324, Si5325/Si5326, and Si5327
Any-Frequency Precision Clock Timing ICs. The Si5316, Si5322, and Si5323 are controlled directly using
configuration pins on the devices, while the Si5319, Si5324, Si5325, Si5326, and Si5327 are controlled by a
microprocessor or MCU (micro-controller unit) via an I²C or SPI interface. The Si5316 is a jitter attenuator with a
loop bandwidth ranging from 60 Hz to 8.4 kHz. The Si5322 and Si5325 are low jitter clock multipliers with a loop
bandwidth ranging from 30 kHz to 1.3 MHz. The Si5319, Si5323, and Si5326 are jitter-attenuating clock multipliers,
with a loop bandwidth ranging from 60 Hz to 8.4 kHz. The Si5324 and Si5327 have features and capabilities very
similar to the Si5326, but they have much lower loop bandwidths that range from 4 to 525 Hz. The Si5326 device
can optionally be configured to operate as a Si5325, so a single evaluation board is available to evaluate both
devices. Likewise, the Si5323 can be configured to operate as a Si5322, so the two devices share a single
evaluation board.
The Si531x/2x Any-Frequency Precision Clocks are based on Silicon Laboratories' third-generation DSPLL^®
technology, which provides any-frequency synthesis in a highly integrated PLL solution that eliminates the need for
external VCXO and loop filter components. The devices have excellent phase noise and jitter performance. The
Si5316 is a jitter attenuator that supports jitter generation of 0.3 ps RMS (typ) across the 12 kHz–20 MHz and
50 kHz–80 MHz jitter filter bandwidths. The Si5319, Si5323, and Si5326 jitter attenuating clock multipliers support
jitter generation of 0.3 ps RMS (typ) across the 12 kHz–20 MHz and 50 kHz–80 MHz jitter filter bandwidths. The
Si5324 and Si5327 are jitter attenuating clock multipliers supporting jitter attenuation of 0.3 ps RMS (typ) and
0.5 ps RMS (typ) across the 12 kHz to 20 MHz and 50 kHz to 80 MHz bands. The Si5322 and Si5325 support jitter
generation of 0.6 ps RMS (typ) across the 12 kHz–20 MHz and 50 kHz–80 MHz jitter filter bandwidths. For all
devices, the DSPLL loop bandwidth is digitally programmable, providing jitter performance optimization at the
application level. These devices are ideal for providing clock multiplication/clock division, jitter attenuation, and
clock distribution in mid-range and high-performance timing applications.
Rev. 0.6 1/12
Figure 1. Si532x QFN EVB
Copyright © 2012 by Silicon Labs
Si531x/2x-EVB