|
S8880A Datasheet, PDF (9/30 Pages) Seiko Instruments Inc – ENERGY HARVESTING POWERED BY ULTRA-LOW POWER AND ULTRA-LOW VOLTAGE OPERATION BOOST CHARGE PUMP FOR STEP-UP DC-DC CONVERTER STARTUP | |||
|
◁ |
ENERGY HARVESTING POWERED BY ULTRA-LOW POWER AND ULTRA-LOW VOLTAGE OPERATION BOOST CHARGE PUMP FOR STEP-UP DC-DC CONVERTER STARTUP
Rev.1.0_01
S-8880A Series
The following are the connection examples based on the set condition.
The symbols used in the connection diagrams are described in Table 9 below.
Element Name
Schottky diode
Capacitor
Schottky diode
Pull-down resistor
Bleeder resistor
Bleeder resistor
Symbol Constant
SD1
CVDD
SD2
ROUT
R1
R2
â
CCPOUT Ã 0.1 or
lower
â
â
â
â
Table 9
Description
Preventing a voltage drop of the VDD pin due to output
capacitor CL at step-up DC-DC converter startup
Power smoothing capacitor of the step-up DC-DC converter
Preventing the OUT pin voltage of the S-8880A Series from
exceeding the absolute maximum rating
Preventing the VM pin voltage of the S-8880A Series from
exceeding the absolute maximum rating
1. VOUT ⤠3.0 V, CL ⤠CCPOUT à 0.1, no load
VIN
CCPOUT
CPOUT
OUT
VIN S-8880A Series
VM
CIN
VSS
VDD
VIN Step-up DC-DC converter VOUT
VSS
VVOUT
CL
2. VOUT ⤠3.0 V, CL > CCPOUT à 0.1
VIN
CCPOUT
CPOUT
OUT
VIN S-8880A Series
VM
CIN
VSS
Figure 7
SD1
VDD
CVDD
VIN Step-up DC-DC converter VOUT
VSS
VVOUT
CL
Figure 8
9
|
▷ |