S-93C76A Datasheet, PDF (7/33 Pages) Seiko Instruments Inc – CMOS SERIAL E2PROM

Rev.3.2_00
CMOS SERIAL E²PROM
S-93C76A
„ DC Electrical Characteristics
Table 9
−40 to +85°C
+85 to +105°C
Item
Symbol Conditions _{VCC = 4.5 to 5.5 V VCC = 2.5 to 4.5 V VCC = 1.8 to 2.5 V VCC = 4.5 to 5.5 V} Unit
Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max.
Current consumption (READ) I_CC1 DO no load   0.8   0.5   0.4   0.8 mA
Table 10
−40 to +85°C
+85 to +105°C
Item
Symbol Conditions _{VCC = 4.5 to 5.5 V VCC = 2.7 to 4.5 V VCC = 4.5 to 5.5 V} Unit
Min. Typ. Max. Min. Typ. Max. Min. Typ. Max.
Current consumption (WRITE) I_CC2
DO no load   2.0   1.5   2.0 mA
Table 11
−40 to +85°C
+85 to +105°C
Item Symbol
Conditions
V_CC = 4.5 to 5.5 V V_CC = 2.5 to 4.5 V V_CC = 1.8 to 2.5 V V_CC = 4.5 to 5.5 V ^Unit
Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max.
Standby current
consumption
I_SB
CS = GND, DO = Open,
Other inputs to V_CC or   2.0   2.0   2.0   2.0 µA
GND
Input leakage
current
I_LI
V_IN = GND to V_CC
 0.1 1.0  0.1 1.0  0.1 1.0  0.1 1.0 µA
Output
current
leakage
I_LO
V_OUT = GND to V_CC
 0.1 1.0  0.1 1.0  0.1 1.0  0.1 1.0 µA
Low level
output voltage
V_OL
High level
output voltage
V_OH
Write enable
latch data hold V_DH
voltage
I_OL = 2.1 mA
I_OL = 100 µA
I_OH = −400 µA
I_OH = −100 µA
I_OH = −10 µA
Only when write
disable mode
  0.4         0.4 V
  0.1   0.1   0.1   0.1 V
2.4         2.4   V
V_CC− 0.3   V_CC− 0.3      V_CC− 0.3   V
V_CC− 0.2   V_CC− 0.2   V_CC− 0.2   V_CC− 0.2   V
1.5   1.5   1.5   1.5   V
Seiko Instruments Inc.
7