S-24CS16A0I-T8T1G Datasheet, PDF (18/46 Pages) Seiko Instruments Inc – 2-WIRE CMOS SERIAL E2PROM

2-WIRE CMOS SERIAL E²PROM
S-24CS16A
Rev.5.200
7. 3 Sequential Read
When the E²PROM receives a 7-bit device address and a 1-bit read / write instruction code set to “1” following a
start condition both in current and random read operations, it responds with an acknowledge.
An 8-bit data is then sent from the E²PROM synchronous to the SCL clock and the address counter is automatically
incremented at the falling edge of the SCL clock for the 8th bit data.
When the master device responds with an acknowledge, the data at the next memory address is transmitted.
Response with an acknowledge by the master device has the memory address counter in the E²PROM
incremented and makes it possible to read data in succession. This is called “Sequential Read”.
The master device outputs stop condition not an acknowledge, the reading of E²PROM is ended.
Data can be read in succession in the sequential read mode. When the memory address counter reaches the last
word address, it rolls over to the first memory address.
R
E
DEVICE A
ADDRESS D
SDA
LINE
1 D7
RA
/C
WK
NO ACK from
Master Device
S
A
A
A
T
C
C
C
O
K
K
K
P
D0 D7
D0 D7
D0 D7
D0
DATA (n)
DATA (n+1)
DATA (n+2)
DATA (n+x)
ADR INC
ADR INC
Figure 19 Sequential Read
ADR INC
ADR INC
18
Seiko Instruments Inc.