S-93C76A-H Datasheet, PDF (17/28 Pages) Seiko Instruments Inc – FOR AUTOMOTIVE OPERATION 3-WIRE SERIAL E2PROM

Rev.3.1_01
2. 2 Output pin
FOR AUTOMOTIVE 105°C OPERATION 3-WIRE SERIAL E²PROM
S-93C76A H Series
V_CC
DO
Figure 17 DO Pin
3. Input pin noise elimination time
The S-93C76A includes a built-in low-pass filter to eliminate noise at the SK, DI, and CS pins. This means that if the
supply voltage is 5.0 V (at room temperature), noise with a pulse width of 20 ns or less can be eliminated.
Note, therefore, that noise with a pulse width of more than 20 ns will be recognized as a pulse if the voltage exceeds
VIH/VIL.
 Precaution
● Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic
protection circuit.
● SII Semiconductor Corporation claims no responsibility for any and all disputes arising out of or in connection with any
infringement of the products including this IC upon patents owned by a third party.
17