|
S-89713B Datasheet, PDF (12/23 Pages) Seiko Instruments Inc – MINI ANALOG SERIES LOW INPUT OFFSET VOLTAGE CMOS OPERATIONAL AMPLIFIER | |||
|
◁ |
MINI ANALOG SERIES LOW INPUT OFFSET VOLTAGE CMOS OPERATIONAL AMPLIFIER
S-89713B Series
Rev.1.0_00
 Precautions
⢠Do not apply an electrostatic discharge to this IC that exceeds performance ratings of the built-in electrostatic
protection circuit.
⢠SII claims no responsibility for any disputes arising out of or in connection with any infringement by products
including this IC of patents owned by a third party.
⢠Use this IC with the output voltage 10 mA or less.
⢠This IC operates stably even directly connecting a load capacitance 150 pF or less to the output pin, as seen in
Figure 15. When using a load capacitance 150 pF or larger, set a resistor 470 ⦠or more, as seen in Figure 16.
In case of connecting a filter for noise prevention, and using a load capacitance 150 pF or more, also set a
resistor 470 ⦠or more as seen in Figure 17.
VDD
VINï¼
VINï¼
ï¼
ï¼
VSS
VOUT
Load
capacitance
150 pF or less
Figure 15
VDD
VINï¼
ï¼
VINï¼
ï¼
VOUT
470 ⦠or more
VSS
Load
capacitance
Figure 16
VDD
VINï¼
VINï¼
Filter
ï¼
VOUT 470 ⦠or more
ï¼
Load
capacitance
VSS
Figure 17
Caution The above connection diagram and constant will not guarantee successful operation.
Perform through evaluation using the actual application to set the constant.
12
Seiko Instruments Inc.
|
▷ |