S-1200 Datasheet, PDF (12/31 Pages) Seiko Instruments Inc – HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR

HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
S-1200 Series
Rev.3.2_00
7.
Temperature
coefficient
of
output
voltage

∆V_OUT
∆Ta • V_OUT

The shadowed area in Figure 11 is the range where V_OUT varies in the operating temperature range
when the temperature coefficient of the output voltage is ±100 ppm/°C.
Ex. S-1200B28 Typ.
V_OUT
[V]
+0.28 mV / °C
V_OUT(E)^*1
−0.28 mV / °C
−40
25
85
Ta [°C]
*1. V_OUT(E) is the value of the output voltage measured at 25°C.
Figure 11
A change in the temperature of the output voltage [mV/°C] is calculated using the following equation.
[ ] [ ] [ ] ^∆VOUT mV / °C ^*1 = VOUT(S) V ^*2 × ^∆VOUT ppm / °C ^*3 ÷ 1000
∆Ta
∆Ta • VOUT
*1. Change in temperature of output voltage
*2. Specified output voltage
*3. Output voltage temperature coefficient
12
Seiko Instruments Inc.