AATIAN76 Datasheet, PDF (2/8 Pages) SiGe Semiconductor, Inc. – Dual Slew Rate Controlled Load Switch

EV-140
AAT4282A EVAL:
Dual Slew Rate Controlled Load Switch
Symbol
U1
C1
C2
C3
C4
Description
AAT4282A TDFN22-8
1μF 10V 0603
1μF 10V 0603
0.1μF 10V 0603
0.1μF 10V 0603
Table 1: AAT4282A Evaluation Board Bill of Materials.
Test Equipment
1. Unit under test (UUT) is the AAT4252A Evaluation Board.
2. One (1) Keithley 2430 3A source meter or equivalent.
3. Two (2) XT30-2 power supplies or equivalent.
4. Two (2) 10Ω, 100W variable resistors, or two DC electronic loads.
5. Two (2) Fluke 189 DC voltmeters or equivalent. Set to DCV setting.
6. A HP33120A 15MHz Function/ Arbitrary waveform generator. Set to PWM setting.
7. Oscilloscope: Tektronix TDS3054B or equivalent, three (3) Tek P6139A oscilloscope voltage probes or
equivalent, and one Tektronix TCP202 300V 15A peak current probe.
8. Miscellaneous test leads (banana plug to clip lead type is recommended).
2
EV-140.2007.08.1.0