TLE4214G Datasheet, PDF (3/16 Pages) Siemens Semiconductor Group – Intelligent Double Low-Side Switch 2 x 0.5 A

TLE 4214 G
Pin Definitions and Functions
Pin No.
6, 16
10
2
7
5
9
1
15
3, 4, 8, 11 … 14,
17 … 20
Symbol
GND
IN2
V_S
Q2
Q1
ENA
IN1
STA
N. C.
Function
Ground Design wiring for the max.
short-circuit current (2 x 1 A)
Control input 2 (TTL compatible) activates the output
transistor 2 in case of high potential
Supply voltage In case of overvoltage at this pin large
sections of the circuit are deactivated. The status
output indicates this malfunction without delay time.
Output 2 Shorted load protected, open collector
output for currents up to 0.5 A, with clamping diodes to
supply voltage.
Output 1 Shorted load protected, open collector
output for currents up to 0.5 A, with clamping diodes to
supply voltage.
Enable input, active high
Control input 1 (TTL-compatible) activates output
transistor 1 in case of high potential
Status output (open collector) for both outputs;
indicates overtemperature, overload, open load and
shorted load to ground as well as overvoltage at pin 3.
It is switched to high after a defined delay time in case
of malfunction (except: overvoltage)
Not connected
Semiconductor Group
296