SEK90-HN050AK02 Datasheet, PDF (3/7 Pages) SICK AG – MOTOR FEEDBACK SYSTEMS ROTARY HIPERFACE

SEK90-HN050AK02 | SEK90
MOTOR FEEDBACK SYSTEMS ROTARY HIPERFACE®
Weight
0.13 kg
Moment of inertia of the rotor
340 gcm²
Operating speed
3,000 min⁻¹
Angular acceleration
≤ 50,000 rad/s²
Permissible shaft movement, radial, static ± 0.2 mm
Permissible shaft movement, radial, dynam- ± 0.05 mm
ic
Permissible axial shaft movement
± 0.5 mm ¹⁾
Connection type
Male connector M12, 8-pin
1) _{Relative to the installation position, as described in the assembly instructions (order nr. 8013609) and in the proposed customer fitting.}
Ambient data
Operating temperature range
–30 °C ... +115 °C
Storage temperature range
–50 °C ... +125 °C, without package
Relative humidity/condensation
90 %, Condensation not permitted
Resistance to shocks
100 g, 6 ms (according to EN 60068-2-27)
Frequency range of resistance to vibrations 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
EMC
According to EN 61000-6-2 and EN 61000-6-3 ¹⁾
Enclosure rating
IP40, with mating connector inserted and closed cover (according to IEC 60529)
1) _{The EMC according to the standards quoted is achieved when the motor feedback system is mounted in an electrically conductive housing, which is connected to}
the central earthing point of the motor controller via a cable shield. Users must perform their own tests when other shield designs are used.
Classifications
ECl@ss 5.0
ECl@ss 5.1.4
ECl@ss 6.0
ECl@ss 6.2
ECl@ss 7.0
ECl@ss 8.0
ECl@ss 8.1
ECl@ss 9.0
ETIM 5.0
ETIM 6.0
UNSPSC 16.0901
27270590
27270590
27270590
27270590
27270590
27270590
27270590
27270590
EC001486
EC001486
41112113
2017-05-10 11:53:11 | Online data sheet
S ubject to change without notice
MOTOR FEEDBACK SYSTEMS | SICK
3